OnePass® open-ceiling wiring simplifies the installation of HID and fluorescent fixtures. OnePass Standard Features Traditional hardwiring requires three or more passes to install conduit, pull wire and hang fixtures.

• Exclusive OCS thumbslide phase selector
• 5 conductor max
• 2 Neutrals available
• 120, 240, 277,347 & 480 voltages
• 12AWG & 10AWG 20A option
• Use with normal, emergency, nightlight fixtures and emergency units
• Custom cable colors available
• NYC Certified

The OnePass Starter Cable 2-Port (OSC2) provides the interface between hardwiring and the first industrial fixture. The flexible 2-port OSC2 can be used to provide power to the fixture through either an OCS (Circuit Selector) or OCU (Unselectable) and continue power downstream. Conventional wiring methods bring power from the panel to the homerun location where the OSC2 is installed.

Attributes:

• Pin-and-socket contacts.
• Equipped with a straight connector that fits in a standard 1/2" trade-sized knockout.
• Additional labeling properly denotes type and position of each conductor.
• Uniquely keyed for industrial/open ceiling applications.
• Safety keying prevents the accidental mismatching of components with different voltages.
• Injection-molded high-impact polymeric compound enclosure.

Electrical:

• Rated for use on 20-amp branch circuits only.
• The OSC2 is available with all 12AWG conductors and a full-sized 12AWG ground conductor or with all 10AWG conductors and a 10AWG ground conductor.
• All conductors are copper with a 90°C thermoplastic insulation rated at 600V. Leads are pre-stripped 5/8" for ease of wiring.